November 2026 · 7 min read

How to Track Black Friday and Cyber Monday Campaign Links (2026)

Read in: Português · Español

Black Friday 2026 is Friday 27 November and Cyber Monday is Monday 30 November. Over those four days the same offer goes out by email, social posts, ads, partners and maybe a printed flyer. Afterwards your shop shows one sales total, and you can't tell which of those channels earned it.

To track Black Friday campaign links, you need about an hour before the sale starts: give every placement its own link. That means one short link per placement, UTM tags on each destination, and a separate QR code for anything printed. Below is the setup, a naming scheme you can copy, and what to read in the numbers the week after.

We make TrimLink, a link shortener, and use it in the examples. Every step works with any shortener that counts clicks, or with plain tagged links.

Why every placement needs its own link

If your newsletter button and your Instagram story share one link, the click count is a sum you can never split again. You will see 900 clicks, but not whether the email or the story did the work.

A placement is a channel plus a spot: the newsletter's main button, the P.S. line at the bottom of the same email, the Instagram bio, Friday's story, the paid ad, the partner's newsletter, the flyer at the till. Each one gets its own link. Then every number in your reports maps to one decision you made.

Two things carry that information:

  • UTM tags on the destination URL tell your web analytics (Google Analytics 4 or your shop's own reports) where a visit came from, so sales can be traced to a channel.
  • A separate short link per placement gives you a click count for that spot alone, and a clean link that fits in a post, a text message or a printed flyer.

Write the naming scheme before you make a single link

Most tracking breaks because the same channel gets three spellings. Decide the names once, write them down and copy from the list. Here is a scheme for a small shop:

Placementutm_sourceutm_mediumutm_campaignutm_content
Newsletter, main buttonnewsletteremailbfcm-2026main-button
Newsletter, P.S. linenewsletteremailbfcm-2026ps-line
Text message to customerssmssmsbfcm-2026friday
Instagram bioinstagramsocialbfcm-2026bio
Instagram story, Fridayinstagramsocialbfcm-2026story-friday
Paid Facebook adfacebookpaid-socialbfcm-2026ad-a
Partner's newsletterpartner-namereferralbfcm-2026partner-email
Flyer at the tillflyerprintbfcm-2026till

The rules behind it:

  1. Lowercase only, hyphens instead of spaces. "Email" and "email" can show up as two separate rows in your reports, and nobody wants to add them up by hand.
  2. One campaign name for the whole weekend. Use bfcm-2026 everywhere and let utm_content say which day or which variant. Next year, bfcm-2027 sits right next to it.
  3. Pick mediums that Google Analytics already understands. Google's default channel rules sort visits by these values. A medium of email lands in the Email channel, sms in SMS, social with a social site as the source in Organic Social, and referral in Referral. A paid medium that starts with "paid" (such as paid-social) with a social site as the source lands in Paid Social.
  4. Printed placements have no channel of their own. Google Analytics has no default channel for a flyer, so those visits sit under "Unassigned". That's fine. Filter by utm_source=flyer or by campaign to find them.

Paid search ads are left out on purpose. Google Ads has its own tracking (auto-tagging), and it works better than hand-made tags there.

The UTM parameter guide explains each tag in more depth, and the UTM cheat sheet has ready values for most channels.

Make the links

Work down your table, one row at a time.

  1. Build the tagged URL. Use the free UTM builder, which covers all five tags including utm_content. Point it at a page that will still exist on Monday, such as your sale page, not a product that may sell out.
  2. Shorten it. Paste the tagged URL into your shortener. In TrimLink you can also add source, medium and campaign as campaign tags while you create the link, and give it a title like "BFCM newsletter main button" so the dashboard reads like your table.
  3. Use readable slugs for anything spoken or printed. yourbrand.link/bf-till is easier to type from a flyer than a random code. TrimLink's free plan includes 5 custom slugs and 1 custom domain, and a link on your own domain looks more trustworthy in an inbox. The guide to custom short links walks through the domain setup.
  4. Double-check the destination before you send or print. A TrimLink short link always goes to the URL it was made with. If the sale page might move, link to a page that stays put and update that page instead.

Check your limits before the busiest weekend of the year

Count your placements against your plan. TrimLink's free plan allows 25 links a month, which covers a table like the one above with room to spare.

Clicks matter more. The free plan counts 1,000 clicks a month. Past that, links keep redirecting but the counting pauses until your monthly count resets. On the free plan there is also a ceiling: after 10,000 more uncounted visits across all your links in the same monthly cycle, the links show a "Link paused" page until you upgrade or your next monthly cycle starts. If your email list has 20,000 people, Friday alone can pass 1,000 clicks, and you would lose the numbers for the rest of the weekend. Starter counts 10,000 clicks a month for $5. Check the pricing page against your list size before Thursday, not on Saturday morning.

QR codes for anything printed

Flyers, receipts, posters in the window, cards in the parcel: each printed placement gets its own QR code made from its own short link. Then you can tell the till flyer from the window poster.

  • A TrimLink QR code points at the short link, and scans are counted apart from typed or tapped clicks, so the dashboard shows how many people came from paper.
  • The free plan includes 5 QR codes a month, with TrimLink branding on the code.
  • Print the short URL under every code for people who won't scan.
  • Scan a printed proof with two different phones before you print the whole run.

Avoid QR generators that encode their own redirect and switch it off when a trial ends. The flyers outlive the trial. Our guide to QR codes that never expire explains what to look for, and the QR best practices cover size, contrast and placement.

A ten-minute check on Thursday

Before the first email goes out:

  • Open every short link on a phone and on a laptop. Each should land on the right page with the UTM tags visible in the address bar.
  • Make sure the sale page is live, or that it shows something sensible if someone clicks early.
  • Scan every QR code from the printed version, not the screen.
  • Keep your table in a spreadsheet with a column for each short link. That sheet becomes your report.
  • Put a reminder in your calendar for Tuesday 1 December to read the numbers while you still remember what you sent when.

Reading the numbers the week after

Clicks tell you which placement pulled people in. Sales tell you which one paid. You need both, and they live in different places.

In the shortener: compare clicks per link. Did the main button beat the P.S. line? Did Friday's story beat Sunday's? Did anyone scan the till flyer at all? On TrimLink's free plan you see clicks, devices, the top 5 countries and referrers for each link. The breakdown by UTM source, medium and campaign inside TrimLink is on Pro and above. The full guide to tracking link clicks shows what each number means.

In your analytics or shop: filter by campaign bfcm-2026 and look at orders by source and medium. Divide orders by clicks for each placement. A placement with few clicks and many orders deserves more space next year. One with many clicks and no orders points at a landing page problem, not a channel problem.

Keep in mind that clicks are not people. One person can click twice, and a visitor who saw the ad on Friday may buy from a newsletter link on Monday. Treat the numbers as directions, not exact credit. TrimLink counts clicks without storing raw IP addresses, without fingerprinting and without tracking cookies, so it never builds a profile of the person behind a click.

Finally, save the spreadsheet. Next November you start from a scheme that already works, and bfcm-2027 lines up row for row with this year.

Frequently asked questions

When are Black Friday and Cyber Monday in 2026?

Black Friday is Friday 27 November 2026, the day after US Thanksgiving on Thursday 26 November. Cyber Monday is Monday 30 November 2026.

Should Black Friday and Cyber Monday share one campaign name?

Yes, if it is one offer running across the weekend. Use one name such as bfcm-2026 and put the day or variant in utm_content. If Cyber Monday has a different offer, give it its own campaign name so the two can be compared.

Do UTM tags still work through a short link?

Yes. The tags sit on the destination URL, and the short link sends visitors to that full tagged URL, so your analytics reads them as normal. Open the short link once and check that the tags appear in the address bar.

How many links does a Black Friday campaign need?

One per placement. A small shop with a newsletter, a few social posts, one ad and a printed flyer usually ends up with 8 to 15 links. TrimLink's free plan allows 25 links a month.

Can I count QR code scans separately from clicks?

Yes. Give every printed placement its own QR code made from its own short link. In TrimLink, scans of a link's QR code are counted apart from typed or tapped clicks, so you can see exactly how many visits came from paper.

Part of the complete guide to link management.

Start Free — No Credit Card

Shorten, brand, and measure every link. Track every click, track zero people.

Keep reading

More on links, tracking, and keeping your data yours.