A business card leaves little room, so count the modules
Every QR code is a square grid. Version 1 is 21 x 21 modules, and each version adds 4 modules per side, so version N is 17 + 4N modules wide. On a card, the code is small, so the question is how wide each module ends up. Add 8 modules for the white quiet zone (our tool draws 4 on each side) and divide the printed width by the total.
| What you encode | Version | Modules incl. border | Module size at 2 cm |
|---|---|---|---|
| A 26-character short link, no centre logo | 2 | 33 | about 0.61 mm |
| The same link with a centre logo (High correction) | 4 | 41 | about 0.49 mm |
| A 168-character vCard, no logo | 9 | 61 | about 0.33 mm |
What a good module size looks like
There is no single legal minimum for phone scanning, but there is a useful reference. GS1, the barcode standards body, sets 0.396 mm as the smallest module for QR codes scanned at retail checkouts, and its UK office shows the maths: (29 + 8) x 0.396 = 14.65 mm. A short link on a 2 cm code clears that comfortably. A full vCard squeezed into 2 cm does not.
That is why a link beats an embedded contact card on a business card. It also explains the cost of a centre logo. Any logo forces High (30%) error correction, which grows the grid. Codes made without a paid plan always carry the TrimLink mark in the centre, so a short link lands on the 0.49 mm row above. Starter and higher plans can remove it. Either way, print the code a little larger rather than squeezing it into a corner.
Getting the file to the printer
SVG is the safest format for print because it is vector and stays sharp at any size. If your printer wants PNG, size it for 300 DPI: pixels = inches x 300. A 2 cm code is 0.79 inches, so it needs about 236 pixels. Our 512 pixel option covers codes up to about 4.3 cm at 300 DPI, and 1024 pixels covers up to about 8.7 cm.
Keep the quiet zone white and uncropped, and keep the dots dark on a light background. Glossy or metallic finishes can reflect light into the camera, so ask for a proof and scan it before the full run.
What the card should link to, and whether scans are counted
Point the code at an address you control for years: a contact page on your own site, a hosted .vcf file (see the vCard QR guide), or your LinkedIn profile. A printed code cannot be changed, so a page you can edit is worth more than a link to a page you cannot.
Codes from this free tool encode exactly the address you paste and create no link, so nobody counts the scans. Codes made without a paid plan also carry a small trimlink.co line under the code. To count scans, create a TrimLink short link in a free account and make the QR code from that link. Each scan is counted like a click. The short link's destination cannot be changed later either, so aim it at that page you control.
Sources (checked November 2026)